Store

Edgun Leshiy 2 Hornet  250MM (REPR-X)
Edgun Leshiy 2 Hornet  250MM (REPR-X)
Edgun Leshiy 2 Hornet  250MM (REPR-X)
Edgun Leshiy 2 Hornet  250MM (REPR-X)
Edgun Leshiy 2 Hornet  250MM (REPR-X)
Edgun Leshiy 2 Hornet  250MM (REPR-X)

Edgun Leshiy 2 "Hornet" 250MM (REPR-X)

The Hornet system is unique to the Leshiy 2 Line.  This modular system allows the user to adjust the length of the Leshiy 2 by adding or removing baffles.  If you need extra quiet for backyard safaris, add a couple of stacks, need to fit in an EDC pack, shorten the MOD50, and it will fit almost anywhere.

The MOD50 is the largest diameter (50MM) in the range of Huma-Air modular air moderators. It consists of an extra-long start chamber with vent holes to dissipate the excess air from the muzzle blast, and it is equipped with fixed threads (available in several sizes), three extra 40 mm long volume chambers, and an endcap. These four chambers are filled with wired metal inserts wrapped with our special Kevlar-enforced ballistic fibers to minimize the sound. Despite the large dimensions of this moderator, we succeeded in keeping the weight extremely low at just 311 grams, which makes it suitable for many air rifles.
This system allows you to configure your silencer in terms of length, caliber, volume chamber size, and content of the internal silencer chambers.

The set comes with a unique black anodized precision aluminum adaptor to fit the moderator to the frame of the Leshiy 2.

Alternatively, add or remove volume chambers with different lengths, volumes, and internals.
By mixing these variables, you can influence your silencer's frequency and output decibels and adjust them perfectly, matching your rifle.
Edgun Leshiy 2 Hornet R.E.P.R. specs 
  • OAL 26.5 inches
  • OAL Folded 13.5 inches
  • LOP 15 inches to the center of the trigger
  • Trigger grip LOO 3.8 inches
  • air reservoir volume 170 CC
  • hammerless
  • semi-automatic 
  • 8 round rotary magazine (detachable)
  • weight 5 pounds
  •  barrel length 250MM (9.8 inches)
  • Trigger - single-stage nonadjustable 
    • 1 pound pull
  • Picatinny top rail -20 MOA
  • Picatinny bottom rail - 5 slot  
  • Regulator capacity (adjustable)
    • 60-280 BAR
Included with the gun
  • 2 magazines included (8 round)
  • MOD50 silencer and adaptor ( 4 baffles, extra are optional)
  • 2 magazine holders
  • fill probe
  • spare transfer ports
  • 1 spare magazine magnet
Shot count / Speed / Working Pressure
  • 177 Caliber 
    • 900 FPS 10.34 grain
    • 36 shots per fill
    • 90-300 bar
  • .22  Caliber
    • 870 FPS (18.1 grain)
    • 28 Shots per fill
    • 120-300 BAR
  • .25 Caliber
    • 800 FPS (25.39 grain)
    •  22 shots per fill
    • 130-300 bar
  • .30 caliber
    • 740 FPS (44.75 grain)
    • 18 shots per fill
    • 130-300 bar

Caliber
.177
22
25
30
Reservoir
Aluminum
350CC Carbon Fiber Bottle
460 Monster Bottle
Price:
$2,575.00 - $2,860.00
(based on selected options)
REPR
The REPR is a transverse or perpendicular microregulator only a few MM tall.  It uses a cup that is screwed into the plenum sideways.  A mini Belleville washer stack is used along with a single-piston O-ring.  Placed between the air reservoir and plenum is a debris plug that prevents contaminants from entering the regulator.  The REPR can regulate the plenum pressure between 60-280 BAR.  The black disc is used to increase or decrease pressure in the plenum.  With the REPR,  increase and decrease of the regulator pressure can be done while the gun is fully charged; there is no need to degas the Leshiy to adjust the regulator.Additionally, the REPR is equipped with a removable plug with 1/8 BSPP threads; this is used to check the plenum's pressure if desired.    The key to this system is not the volume of the plenum nor the fact that the pressure can go so high - but the combination of the patented valve and high-pressure regulator.  No need to waste money on "power plenums" or other snake oil items.,  Leave those upgrades for traditional valve systems.  The new REPR comes complete with everything you need, straight from EDgun.  Ed has a tradition of selling guns that don't need aftermarket gizmos to ensure performance.  The new REPR is ready directly from EDgun without having to pay for extra items.