THE SHORTEST MORA—NOT A WATERED-DOWN MORA
The RTI Mora Compact V2 Gen 2 takes the power system, external tuning capability and long-projectile compatibility of the Mora platform and packages it into a rifle measuring only 30.9 inches overall.
Available from EDgun West in .22, .25 and .30 caliber, every Mora Compact in this listing uses a 500mm / 20-inch barrel and a 500cc carbon-fiber bottle.
Do not confuse “Compact” with lightweight, low-powered or entry-level. At approximately 9 pounds before adding a scope, the Mora Compact is a substantial precision PCP rifle. Its advantage is not featherweight construction—it is the combination of serious air capacity and an advanced tuning system in the shortest Mora configuration.
It is built for shooters who want a rifle that is easier to transport, easier to manage around a bench or vehicle, and less cumbersome in the field than the Standard or Sniper, without giving up the core engineering that defines the Mora.
AVAILABLE CALIBERS
• .22 caliber / 5.5mm
• .25 caliber / 6.35mm
• .30 caliber / 7.62mm
CORE MORA COMPACT FEATURES
• 500mm / 20-inch barrel
• 500cc carbon-fiber air bottle
• 125cc integrated power plenum
• Externally adjustable assisted valve
• Adjustable regulated pressure system
• Magazine capacities by caliber:
- .22 caliber: 19 rounds
- .25 caliber: 15 rounds
- .30 caliber: 13 rounds
• Maximum 300-bar / 4,350 PSI fill pressure
• Adjustable 20–150 MOA Picatinny optics rail
• Smooth side-lever cocking action
• Fully adjustable two-stage trigger
• Trigger pull adjustable down to approximately 200 grams
• Two separate pressure gauges
• M-LOK-compatible accessory mounting points
• Reversible right- or left-hand magazine placement
• Interchangeable caliber system
• Standard AR-15-pattern grip
• Integral sound-reduction system where legally permitted
• Hušh 50 carbon moderator included
• Two magazines included
• M-LOK bottle shield included
• Heavy-duty fitted transport case included
REAL EXTERNAL TUNING
Many PCP air rifles advertise adjustability but give the shooter little more than a numbered wheel. The Mora provides meaningful control over the rifle’s regulated pressure and valve behavior.
At the center of the platform is a 125cc power plenum and RTI’s externally adjustable assisted-valve system. The valve uses pressure generated during the shot cycle to help it close more quickly. The goal is to produce the required energy while reducing the amount of air wasted after the projectile has already begun moving through the barrel.
External valve adjustment allows dwell time to be matched more closely to:
• Caliber
• Pellet or slug weight
• Desired velocity
• Regulated pressure
• Accuracy requirements
• Air-efficiency goals
This does not mean the rifle needs to be constantly adjusted. A good tune should be built around the projectile the owner actually intends to use and then left alone unless the ammunition or performance objective changes.
Maximum velocity is not automatically the best tune. The correct tune is the setting at which the chosen pellet or slug is accurate, stable, and consistent without consuming unnecessary air.
RTI Mora Compact Technical Information
| Feature | Specification |
|---|
| .22 Barrel | RTI RPB barrel; light choke; 1:16-inch twist rate |
| .25 Barrel | RTI RPB barrel; light choke; 1:20-inch twist rate |
| .30 Barrel | Lothar Walther barrel; choked; 1:16-inch twist rate |
| Barrel Configuration | Can be configured as free-floating or supported beneath the scope area |
| Ammunition Compatibility | Accepts pellets and airgun slugs |
| Maximum Magazine Projectile Length | Approximately 22mm |
| Maximum Single-Loaded Projectile Length | Approximately 25mm |
| Air Bottle | 500cc carbon-fiber bottle |
| Maximum Fill Pressure | 300 bar / 4,350 PSI |
| Fill Connection | Standard Foster connection |
| Shot Count Variables | Caliber, regulated pressure, valve-dwell setting, projectile weight, desired velocity, starting pressure and ending pressure |
| Optics Rail | 190mm, 18-slot Picatinny rail |
| Rail Elevation Adjustment | Approximately 20–150 MOA |
| Trigger | Fully adjustable two-stage trigger; adjustable first and second stages |
| Minimum Trigger Pull | Approximately 200 grams |
| Safety | Mechanically locks the hammer |
| Cocking System | Side-lever action |
| Grip Compatibility | Standard AR-15-pattern grip |
| Magazine Configuration | Reversible for right-side or left-side loading |
| M-LOK Mounting | Mounting points in the breech block, beneath the trigger guard and on the included bottle shield |
| Seal Diagnosis | External witness holes correspond with individual internal O-rings |
| Valve Service | Valve assembly can be removed without fully disassembling unrelated rifle components |
| Caliber Conversion | Supported with the appropriate RTI barrel, probe, magazine and related caliber-conversion components |
| Conversion Setup | Regulated pressure and valve settings must be adjusted for the new caliber and projectile |
WHAT IS INCLUDED
• RTI Mora Compact V2 Gen 2 PCP air rifle
• Customer-selected .22, .25 or .30 caliber
• 500mm / 20-inch barrel
• 500cc carbon-fiber bottle
• Two magazines in the selected caliber
• Hušh 50 carbon moderator
• M-LOK bottle shield
• Heavy-duty transport case with fitted foam
EDgun West provides U.S.-based assistance from people who understand high-performance regulated PCP air rifles. We can help you select the right Mora configuration before the sale and provide knowledgeable guidance after the rifle arrives.
No anonymous marketplace. No overseas time-zone dance. No pretending that .22, .25 and .30 are interchangeable answers to the same question.
Choose the correct Mora once—and buy it from people who understand what makes it work.